The Cutch State Railway also spelled as Kutch State Railway was an isolated Indian 2 ft 6 in (762 mm) narrow gauge railway in Princely State of Cutch.
The railway ran north from the port of Tuna towards Anjar in the Kutch. The railway was financed by the Maharao Khengarji Bawa of Cutch, and the initial section to Anjar was opened in 1905. At the time Cutch was a princely state within British India. An extension from Anjar to the state capital of Bhuj was later made and lines opened in 1908, giving a total length of 36.25 miles. Further lines were later added east of Anjar.[1]
In 1940 the railway carried 300,000 passengers, while the main freight traffic was cotton, grain and sugar. The railway used four small 4-4-0 type locomotives, later supplemented by three 25 ton 4-6-0 locomotives. The Maharao owned a petrol railcar designed by E. R. Calthrop, which the Maharao Khengarji III used as a shooting car on his hunting expeditions.[1]
The railway was owned, managed and also operated by Princely State of Cutch. The narrow gauge lines of Cutch State Railway were laid by Mistris of Kutch, of course, services of British Engineers were also employed.[2][3]
The laying of first rails started in 1900-01, from Tuna to Anjar, which became operational in 1905. The works for lines from Anjar to Bhuj started in 1901-02 and completed in 1908. Bhuj to Naliya works started in 1915 and completed in 1918 and Varsamedi (near Anjar ) to Kandla started in end of 1930 and completed in 1932. All these lines were laid by members of Mistris of Kutch, who were expert in this field in those years.[2][3]
The Cutch State Railways continued to operate as separate system ( even after independence of India & merger of Princely State of Cutch ) from 15 August 1947 till the railway was merged into the Western Railway on 5 November 1951, at which time the total length was 72 miles.[4][5]